Project
- Stars
- Started
- Issues
- License
BLUETTI Modbus
Plug-inRead BLUETTI stations over your local network
BLUETTI Modbus brings supported battery and power readings into Home Assistant, a home-automation server, over local Modbus TCP. AC500 and AC200L have confirmed AC and DC output controls; AC200PL can use the AC200L profile for readings.
Use Home Assistant 2026.10.1 or newer and firmware that exposes the station’s local Modbus settings. The BLUETTI app is needed for initial network setup and device credentials. Some energy and battery-pack measurements are unavailable. AC500 must use unit ID 1: other IDs can freeze its Modbus service until the station is power-cycled.
- Use power-station outlets in home routines
- See battery and power readings in your own dashboard
Feedback
How did it go? Tips, problems, questions…
Feedback
How did it go? Tips, problems, questions…